Home Page | About Us| Contact

• WORKING AREA:
  LENGTH: 736 x WEIGHT: 610(29" x 24")
  MAX STACK HEIGHT= 20mm(3/4")
• MAX PRESSURE CAPACITY:
  60 TONS (600kn); 10 bar ON AIR BAG
• VACUUM:
  PUMP CAPACITY = 25 m³/h
  VACUUM LEVEL = BETTER THAN - 850 mbar
• MAX WORKING TEMPERATURE:
  STANDARD : 240° C .
  OPTIONAL : 300° C.
• ELECTRICAL DATA:
  LINE = 3 PH + GND.
  VOLTAGE =400 V.
  POWER = 25 kva .
  
• COMPRESSED AIR:
  PRESSURE = 6 ~ 10
  CONSUMPTION = 980 NL/cycle
• DIMENSIONS:
  LENGTH: 2450 ; WIDTH: 1250 ; HEIGHT: 1250(mm);
  WORKING HEIGHT = 1000 mm.
• WEIGHT:
  2400Kg

DESCRIPTION:

THE MONOLAMINATION PRESS™ IS A SINGLE-OPENING PRESS WHICH USES TWO STAGES HEATED THROUGH ELECTRICAL RESISTANCE. BY THIS SYSTEM EACH LAYER OF THE STACK IS UNIFORMLY HEATED FOLLOWING THE HEATING PROFILE IN USE. HEATING, PRESSURE AND VACUUM ARE CONTROLLED BY A TOUCH PANEL.
THE PRESSURE ON THE STACK IS APPLIED BY A FREE- FLOATING PLATE AND IT GUARANTEES AN HIGH THICKNESS ACCURACY,
AND PRESSURE DISTRIBUTION THROUGHOUT THE STACK

ADVANTAGES:

1. FLEXIBILITY ( IN ABOUT 30 MINUTES FROM INNER-LAYER TO DRILLING) .
2. TEMPERATURE RISE UP 10°C /min.
3. FAST CYCLE TIME.
4. SMALL FOOTPRINT.
5. LOW ENERGY CONSUMPTION.
6. IMPROVES OVERALL QUALITY.
7. NO MATERIAL STRESS.